HUMAN THOUGHT PROJECTION IN COMPUTER I have been trying to record my own thoughts into the computer for a long time and recently I finally succeeded . My Guru and Guides provided me with a lot of guidance and help to achieve this. Initially, I experienced lot of interference from different entities. Entities were passing on their messages which blocked my thoughts from being registered in the computer. After many trials and requests to keep them silent during my thought projection practice sessions, I was eventually able to register some of my thoughts with simple words. I sit near the computer & I repeated short messages mentally for about 4 seconds, the messages registered only once, the rest appears to be blank. But I felt this was a good start. I got confirmation from my guide that I was successful and he said to me, “See, it is like talking on a telephone!" Gradually I was able register longer sentences. Next I faced a different type of problem. The Projected sound recordings were being changed during subsequent playing. They were also getting changed as I emailed them to others to check and confirm. I am still trying to establish how to get a stable thought projected file. Below is the explanation of my recording and editing procedure. I have added photos of my laptop screen at different stages of recording and some sound files for your reference. All of the recordings are projected by my thoughts or mental words and I did not use a microphone at all. Following are the steps of recording and editing: (1) Firstly, I open the white noise program of Sound - Masker software. I have used frequency as 1000 MHZ and the amplitude set at medium. Then connect the audio output socket of laptop with line - in socket using an audio connecting cable. Now I open a new blank file using Gold - wave soft ware for my recording. I focus my attention on my eyebrow till it starts tinkling. I look at the screen, press the record button in the screen and mentally think about the message, I need to record. Thus my mind signal gets modulated with white noise electronic signal and gets recorded in the computer. (2) Secondly, I stop the noise program and remove the connecting cable and save the recorded file as a raw file. Now I select the batch-processing program (basically group of preselected editing files) of Gold - Wave program and run the batch editing process. It takes few seconds and the edited file gets saved as a processed sound file. (3) Now I open the processed and saved file. Do necessary length trimming and amplitude enhancement as required. There are a few cases, where human could register thought in tape recorder but I am not aware of examples of this type of thought projection in computer.
